This is a success
case for sharing! We newly tested OBDSTAR X300 PRO3 Key Master
is OK to program Ford Transit 3-button remote key. Check below steps you can
take!
Power up Key
Master→ Choose “Vehicles” → “Immobilizer” → “Ford/ Lincoln” →“Ford/ Lincoln
V31.09” → “Ford” → “Transit”
Choose “Program
Keys”
Use the new key
you need to program to turn ignition on. (Now car immobilizer light should
blink)
Key Master will
ask you to turn on ignition, press ENT button to confirm.
It says this
process will not erase key, press ENT button.
Wait a while, it’s
communicating.
Now you can see “Program
success”, which means you successfully use OBDSTAR X300 PRO3 to
program a new working Ford Transit transponder!
Turn ignition off
and remove the key.
Insert the key
again and turn ignition on. There is no blinking immobilizer anymore!
没有评论:
发表评论